Connection Of Headphones; Connection Of An External Amplifier - MC Crypt MC-37A Mode D'emploi

10. Connection of Headphones

Common headphones can be connected to the 3.5 mm stereo plug socket "PHONES/OUTPUT" (42) at the rear of the keyboard.
Playback via the integrated speakers is automatically switched off.
Proceed as follows for connection:
• Reduce the volume of the keyboard as far as possible.
• Connect the headphones with the 3.5 mm stereo plug socket "PHONES/
OUTPUT".
• Set a low volume at the keyboard and verify it, e.g. by playing on the clavier; put
on the headphones carefully. Now set the desired volume.
Note:
If the volume is too high you may damage your hearing. Therefore, set the volume to be pleasant and not too loud!

11. Connection of an External Amplifier

An external amplifier (e.g. of a stereo system) can be connected to the 3.5 mm stereo plug socket "PHONES/OUTPUT" (42) at the rear of the
keyboard.
Playback via the integrated speakers is automatically switched off.
Proceed as follows for connection:
• Reduce the volume of the keyboard as far as possible. The same applies for the amplifier.
• Connect the amplifier with the 3.5 mm stereo plug socket "PHONES/OUTPUT". Always select
an analogue input with line level, e.g. the TAPE or AUX input.
• Set a low volume at the keyboard and the amplifier and verify it, e.g. by playing on the clavier;
put on the headphones carefully. Now set the desired volume.
Note:
If the volume is too high you may damage your hearing. Therefore, set the volume to
be pleasant and not too loud!
35