KTM 95814910044C1 Instructions De Montage page 31

–
Position the headlight mask.
Info
Make sure that the wiring harness ACC2
cable for switch
–
bt
Join ACC2
2
ness .
501727-01
–
Join connector for switch
2
ness .
–
Properly route the cable and secure it with a cable tie.
Info
Make sure that the cable cannot be bent or jammed.
501728-01
–
Mount and tighten screws
Guideline
Screw, head-
light mask
501729-01
–
Position the cover and mount expanding rivets
501711-01
–
Position the trim.
–
Mount and tighten screw
Guideline
Screw, side cover
–
Mount and tighten screw
Guideline
Screw, side cover
501730-01 –
Mount and tighten screws
Guideline
Screw, side cover
4
remain accessible.
with the ACC connector from the wiring har-
4
with the connector for wiring har-
bn
.
M6 10 Nm (7.4 lbf ft)
bp
with the seal ring.
M6 7 Nm (5.2 lbf ft)
bq
.
M6 7 Nm (5.2 lbf ft)
bo
.
M6 7 Nm (5.2 lbf ft)
ASSEMBLY 5
bt
and the
Loctite ® 243™
bk
.
13