Elem Garden Technic FBHT65-12TCH Traduction Des Instructions D'origine page 41

STEP 1: Cylinder Cover Assembly
1.Take off the cylinder cover (#21) from beam (#1),then put the cylinder cover (#21) between
cylinder (#72) and wedge (#2).
2.Put the cylinder (#72) back to the beam, screw with flat washer Ø8 (#23), lock washer Ø8 (#22)
and hex bolt M8x20 (#18).
STEP 2: Double Handle Assembly
1.Put the connecting tube (#44) onto the channel of the control valve (#46), lock with hinge pin
Ø5x26 (#42), cotter pin Ø2x10 (#43), then fixed with pliers.
2.Attach frame (#37) to the control valve (#46) using lock washer Ø8 (#22) and inner hex screw
M8x16 (#34).
3.Attach spacer plate (#35) to the frame (#37) using lock washer Ø8 (#22) and inner hex screw
M8x16 (#34).
Assembly Instructions
41