Read and follow all instructions for assembly and operation. Failure to properly assemble this
equipment could result in serious injury to the user or bystanders, or cause equipment damage .
12 TON LOG SPLITTER ASSEMBLY
Set the shipping crate on a solid flat surface and carefully remove the lid. Use two people and
take all parts out of the shipping crate and inspect the components to ensure there are no
missing pieces before starting to assemble the log splitter follow steps 1 through 11.
TOOLS REQUIRED
•
Rubber or Wooden Hammer
•
10 mm,13mm, 16mm, 17mm, 19mm, 23 mm, Wrenches
•
6mm Allen Wrench
•
Large Adjustable Wrench
•
Phillips Screwdriver
•
Pliers
Engine Shipped Without Oil.
Before starting engine, fill with SAE 10W-30 motor oil.
See engine manual for engine oil capacity.
Hydraulic Oil Tank is Shipped Without Oil.
When adding oil verify the oil level using the Oil filter/Dip Stick on the top
of hydraulic oil tank if marking is not shown fill to the L line.
Inspect all Log Splitter Components.
If you have damaged components: Contact the freight company that
delivered the log splitter and file a claim.
CAUTION
40