SOUNDMASTER IR3200 Mode D'emploi page 20

DAB mode receives DAB or DAB plus digital radio signal and displays information about the
station, streaming audio and the program details.

Scanning for stations
The first time you select DAB radio mode, or if the station list is empty, the unit automatically
performs a full scan to see what stations are available. You may also need to start a scan
manually to update the list of stations for one of the following reasons:
 Available stations change from time to time.
 If reception was not good for the original scan, this may result in an empty or incomplete
list of available stations.
 If you have poor reception of some stations (burbling), you may wish to list only stations
with good signal strength.
To start a scan, choose Full scan, once the scan is complete, the radio shows a list of available
stations.

Presets
To store an DAB preset, press and hold the "Preset" button until the display shows the Save
preset screen. Select one of the 10 presets to save the current station. Or press and hold any of
the "1" to "5" buttons on the remote control to store the current playing station into the preset
directly.
To select a preset, press briefly on the "Preset" button, then select one of the listed preset
stations. Or press any of the "1" to "5" buttons to directly recall "1" to "5" presets. Use the "Shift"
button to pre-select preset number 6-10.
You can also use the later mentioned UNDOK app for storing or recalling the presets.

Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment)
information broadcast by the station giving real-time information such as program name, track
title and contact details. Stereo broadcasts are indicated with an icon at the bottom of the
screen. To view further information, press Info button on the radio.
FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data
System) information about the station and where broadcast.
To find a station, press "Tuning/Select" knob. The frequency display starts to run up as the unit
scans the FM band. Alternatively, you can scan up or down by rotating "Tuning/Select" knob.
NOTE: The tuning direction will be followed the last tuned direction.
IR3200 / English Short Instruction Manual
DAB
FM
7