Hurst Jaws Of Life E+Draulic E3 Connect Mode D'emploi page 9

4.2. REMOVING THE BATTERY
Release the lock and remove the battery (figure B).
4.3. QUERYING THE BATTERY STATUS
Press the query button on the battery (figure C). Note also the separate instruc-
tions for the battery�
4.4. FLASHLIGHT FUNCTION OF THE BATTERY
To switch on the flashlight, press the query button on the battery twice in quick
succession (Figure C.). To switch it off, press the query button again. The flash-
light function automatically switches off again after a while.
4.5. SWITCHING ON AND OFF
To switch on, press the main switch (Figure M; No� 1)� The device is ready to op-
erate when the main switch and workspace lighting are illuminated blue� To switch
off, the main switch must be pressed for three seconds.
4.6. ACTUATING THE STAR GRIP VALVE
The working action is triggered by turning the star grip valve� (Figure D)� Every
rescue device has a deadman function� When the star grip is released, it returns rescue device has a deadman function� When the star grip is released, it returns
to the center/neutral position automatically� This ensures the load is retained� to the center/neutral position automatically� This ensures the load is retained�
4.6.1. CUTTING
Turn the star grip valve in the closing direction� (Figure E)�
Position the cutter as perpendicular as possible to the object to be cut (Figure F)�
Cut close to the pivot point of the blade (Figure G)�
4.6.2. SPREADING
Turn the star grip valve in the opening direction (Figure H)�
Open a small gap at the start, then insert the spreader tips as far into the gap as
possible� Do not spread with the aluminum arms! (Figure J)�
4.6.3. PULLING
Secure the traction device in the attachment / bolt hole (page 2; figure I; number 6)
or on the spreader tips� Actuate the star grip valve in the closing direction�
(Figure E)� Note the separate instruction manual for the traction device�
4.6.4. SQUEEZING
Only squeeze in the squeezing area and with the squeezing plates of the spread-
er arms (Figure K)� Actuate the star grip valve in the closing direction� (Figure E)�
4.6.5. PEELING
Special peeling tips are needed for peeling (Figure L)� Actuate the star grip valve
in the opening direction� (Figure H)�
4.6.6. PUSHING
Place the rescue rams between the object to be pushed and actuate the star grip
valve in the extending direction� (Figure H)�
en
es
Every
fr
pt
9