Hurst Jaws Of Life E+Draulic E3 Connect Mode D'emploi page 11

5.5. CONTROL LIGHT FOR SALTWATER BATTERY (FIGURE M; NO. 5)
The control light indicates when a saltwater battery is plugged into the device�
5.6. WARNING LIGHT FOR ELECTRONICS TEMPERATURE (FIGURE M; NO. 6)
The device independently monitors the temperature of the electronics and emits a
warning if the temperature reaches a critical range� In case of increased electronics
temperature, no more turbo mode is available�
Furthermore, the device monitors the battery temperature, and with a cell tempera-
ture of less than -10° C, it reduces the speed in order to warm up the battery� As soon
as the battery is warm enough, all functions are available again at normal speed�
5.7. ILLUMINATED DIRECTION INDICATORS (FIGURE M; NO. 7)
Depending on the direction in which the star grip is moved, the device indicates the
motion direction in the display field.
5.8. CONTROL LIGHT FOR WLAN CONNECTION (FIGURE M; NO. 8)
If there is a WLAN connection, the control light lights up�
6. SETTING UP DATA EXCHANGE WITH CAPTIUM
6.1. SETTING DIFFERENT OPERATING MODES
Mode
Firmware update
Self-test
Protocol upload
Router mode
6.2. LOGGING INTO CAPTIUM
If you wish to use Captium, you must create a user account on www�captiumcon-
nect�com with a user name and password� The rescue device can also be operated
without being connected to Captium�
6.3. ESTABLISHING A NETWORK CONNECTION
So that the rescue device can communicate with Captium, the network connections
must be entered via which the communication should take place� If the access data
for the network changes, the data must be re-entered in the rescue device�
Carry out the following steps consecutively�
Operating step
Hold the star grip in the
closed position +
ON/OFF for 7 seconds
Hold the star grip in the
open position +
ON/OFF for 7 seconds
Hold the star grip in the
closed position +
ON/OFF for 15 seconds
Hold the star grip in the
open position +
ON/OFF for 15 seconds
Display on the control panel
Close symbol flashes + red light
on main switch lights up
Open symbol flashes + close
symbol lights up
Close symbol flashes + red light
on main switch lights up + WiFi
symbol lights up
Open symbol flashes + close
symbol and WiFi light up
en
es
TM
fr
pt
11