Hurst Jaws Of Life E+Draulic E3 Connect Mode D'emploi page 20

Symbol
en
es
10. ACCESSORIES
10.1. BATTERIES
Only HURST lithium-ion rechargeable batteries may be used to operate eDRAULIC
devices� Observe the separate operating instructions for the lithium-ion battery!
A special salt water battery is available from HURST for use in salt and sea water�
10.2. BATTERY CHARGER
fr
Only the "eDRAULIC Power Pack Charger" may be used for the lithium-ion
batteries� Observe the separate operating instructions for the charger�
10.3. POWER SUPPLY
For eDRAULIC devices, there is a power supply with which the devices can be
connected directly to a power outlet� The power supply transforms the alternating
current into direct current, so it can be used in place of the battery� Observe the
separate operating instructions for the power supply�
10.4. CHAIN SETS
Chain sets and pulling adapters are required in order to perform pulling operations
pt
with the eDRAULIC spreaders and combination tools (see chapter, "Pulling")�
Observe the separate operating instructions for the chains sets�
10.5. PEELING TIPS
Special peeling tips are required (see "Peeling" section) to be able to peel openings
in sheet metal parts and vehicles using the eDRAULIC spreaders�
20
Description/note
Cutter power
Round material
Flat material
Round tube
Square tube
Rectangular tube