Publicité
INSTALLATION
1. Your stove does not draw steadily, smoke roll-out
occurs, wood burns poorly, or back-drafts occur
whether or not there is combustion present.
2.
not operate properly, suffer smoke roll-out when
opened, or back-drafts occur whether or not there is
combustion present.
3.
alleviates any of the above symptoms.
4. The house is equipped with a well-sealed vapor barrier
devices that exhaust house air.
5. There is excessive condensation on windows in the
winter.
6. A ventilation system is installed in the house.
Next tighten the hose clamp over the end of the aluminium
FOR USE IN
MOBILE HOME/TRANSPORTABLE
BUILDINGS
• WARNING! DO NOT INSTALL IN SLEEPING ROOM.
• CAUTION! THE STRUCTURAL INTEGRITY OF THE
MOBILE
HOME/TRANSPORTABLE
FLOOR, WALL, AND CEILING/ROOF MUST BE
MAINTAINED.
• INSTALL IN ACCORDANCE WITH 24 CFR, PART
3280 (HUD).
• USE A FACTORY BUILT CHIMNEY THAT COMPLIES
WITH UL 103 STANDARDS; THEREFORE IT MUST
BE A TYPE HT (2100°F).
• USE A SPARK ARRESTER.
• THE STOVE MUST BE ATTACHED TO THE
STRUCTURE
OF
TRANSPORTABLE BUILDINGS.
BUILDINGS
THE
MOBILE
HOME/
SECURING APPLIANCE'S ON A PEDESTAL
TO THE FLOOR
SECURING APPLIANCE'S WITH LEGS TO THE
FLOOR
1. The bracket engages around the square extrusion of
the leveling bolt inserted into the leg.
2.
3. Install one bracket per leg or consult your local
authority having jurisdiction to determine how many
points of attachment are required.
In addition to the previously detailed installation
requirements, the heater must be electrically grounded
to the steel chassis of the mobile home/transportable
building with 8 GA copper wire using a serrated or star
washer to penetrate paint or protective coating to ensure
grounding.
7
© 2023 United States Stove Company
Publicité
