Publicité
FOR CUSTOMER SERVICE CALL: 800-750-2723 EXT 5050
TOOLS AND MATERIALS
You will need a drill with a 1/8" bit to install sheet metal
screws into connector pipe. A 5/16" socket/wrench or
manual. All chimney and chimney connector components
required for your particular chimney installation. For
mobile home/transportable buildings see the "For Use
In Mobile Home/Transportable Buildings" section of this
manual.
BLOWER ASSEMBLY
The blower assembly must be disconnected from
the source of electrical supply before attempting the
installation. The blower assembly is intended for use only
with a stove that is marked to indicate such use. Do not
route the supply cord near or across hot surfaces! Fix the
assembly to the back of the stove with the four screws
provided.
© 2023 United States Stove Company
ASSEMBLY INSTRUCTIONS
ASH PAN ASSEMBLY
two brackets; Slide the ash pan into these brackets.
FLUE COLLAR ASSEMBLY
tabs provided in the parts box.
4
5/6-8 x 1-1/2 BOLT
WASHER
GASKET
HEATER TOP
WELD TAB
Publicité
