EDM Product 33825 Manuel D'instructions page 21

MOUNTING - HANGING THE FAN
CONNECT THE CABLE
Hook
1. Hang the motor assembly on the mounting plate hook for
hands-free wiring and installation of the safety cable.
2. Make wiring connections using the wire connectors
provided as shown above.
INSTALLATION OF THE RECEIVER
▶Place the receiver inside the machine head.
HANG THE FAN
1. Lift the motor assembly,
align the keyhole slots with
the pre-assembled screws on
the mounting plate and turn
it clockwise until it locks into
place.
Instruction manual
2. Lift the motor assembly,
align the keyhole slots with
the pre-assembled screws on
the mounting plate and turn it
clockwise until it locks. Tighten
all screws securely.
3. Install the blade with screws,
aligning each hole as shown and tighten all screws securely.
Repeat this process for the remaining blades.
MOUNTING - FIXING THE LIGHTS
1. Install the light kit bracket, tighten all screws.
2. Connect the light kit to the engine, place the light kit on
the light kit bracket.
Ref. 33825
ES
PT
EN
FR