Publicité
Les langues disponibles
Les langues disponibles
Connection
1. The audio input/output (analogue), optical out (digital) and coaxial out (digital) are available on
the back of the unit to connect A/V amplifier or HiFi system.
2. Insert the DAB/FM antenna included in the product box into its port and extend to the desired
length.
3. Connect the WLAN antenna included in the product box to the W-LAN socket at the back of the
unit for WIFI connection.
4. Unwind the mains cable to its full length. Connect the power cable plug to the mains socket. The
unit is now connected and ready to use
Be sure to connect the power cord to an AC outlet that supplies the correct voltage.
Hold the power plug when plugging into an outlet or unplugging it. Never pull or yank on the
power cord.
5. To switch the unit off completely, unplug the mains cable from the mains socket.
Network Connection
This product only supports wireless network connection for network access and does not support
wired LAN connection.
Wireless network
1. Check first of all whether the control lamps (LINK/ACT) of your router light up.
2. Proceed with the operations described in the below "Getting Started". It is recommended to run
through the setup wizard in the System Settings section.
This unit cannot be connected to a standalone modem directly. A router or a modem
incorporated with a router has to be used.
Since there are various connection configurations, please follow the specifications and
instructions of your telecommunication carrier, Internet service provider, and router setting
guidebook.
EN
Instructions Guide
7
Publicité
