MAJORITY FITZWILLIAM 3 Guide D'instructions page 13

Masquer les pouces Voir aussi pour FITZWILLIAM 3:

Les langues disponibles

Factory Reset

There may be times when you need to reset your unit back to the factory settings especially when you

have

moved house. If you experience reception problems you may want to reset and try again. If you

move to another part of the country and pick up the local and national DAB stations in that area, your

previously tuned channels may no longer be available.

1. While in System settings mode, press 12 w/s 3 buttons to select Factory Reset, and press the

SELECT button to confirm.

2. Press 7 / 8 buttons to select [Yes], and press the SELECT button to confirm or select [No] to

cancel.

After the system reset, all the tuned stations, Internet, DAB & FM preset stations will be erased.

Software update

While in System settings mode, press 12 w/s 3 buttons to select Software update and then

press the SELECT button to confirm.

Press 12 w/s 3 buttons to select "Auto-check setting" or "Check now", and then press the

SELECT button to confirm.

Before downloading software, ensure that the radio is plugged into a stable mains power connection.

Interrupting the mains supply during software download can lead to functional disturbances

and/or damage to the unit!

Setup wizard

The Setup Wizard is available in System Settings. You can run through this to configure settings of

Date/ Time or Network. Once completed, your radio is ready to use.

Info

1. While in System settings mode, press 12 w/s 3 buttons to select Info, then press the SELECT

button to confirm.

2. The software version, Spofity version, Radio ID and Friendly name will show on the display.

1. To view the Privacy policy page, press MENU to go to System settings - Privacy policy.

2. After 'Factory reset' , you need to read and agree with the Privacy policy again.

Instructions Guide