MAJORITY FITZWILLIAM 3 Guide D'instructions page 25

Using headphones
Do not listen to music at high volume when using headphones. Doing so can cause permanent hearing
impairment. Turn the tuner volume level to the lowest before using headphones.
> Only use headphones with a 3.5 mm jack plug.
> Insert the headphone connector in the headphone socket in front of the unit.
Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme
volume when using earphones, especially for extended periods of time.
Sleep Setting
This function allows you to program the unit to switch to standby mode by itself after a set period of
time.
1. To activate the sleep function, press the SLEEP button on remote control repeatedly. The time will
change in the below sequence on every press:
Sleep OFF  15 minutes  30 minutes  45 minutes  60 minutes  90 minutes  120 minutes
2. When your desired sleep time appears in the display, stop pressing the button and the sleep
function will be activated in two seconds. "
will also see displayed, the remaining time until the unit will switch off.
3. When the sleep timer counts down to zero, the unit will turn to standby mode. To switch OFF the
sleep function, while the sleep timer is still counting down, press SLEEP button repeatedly to
select "SLEEP OFF".
Alternatively,
1. Press the MENU button on the remote control to display the function main menu. Press
12 w/s 3 buttons to select Main menu, and then press the SELECT button to confirm.
2. Press 12 w/s 3 buttons to select Sleep, and then press the SELECT button to confirm.
3. Press 12 w/s 3 buttons to select sleep timer, and then press the SELECT button to confirm.
EN
" will show on the display. Next to the sleep icon you
Instructions Guide
25