MAJORITY FITZWILLIAM 3 Guide D'instructions page 11

Press BACK button to exit and then press 7 / 8 buttons to select [YES]. Press SELECT button to
confirm. The Display will show Equaliser Saved.
Network
1. While in System settings mode, press 12 w/s 3 buttons to select Network. Press the SELECT
button to confirm.
2. Press 12 w/s 3 buttons to select from the following settings, then press the SELECT button to
confirm.
Network wizard
PBC Wlan setup
View settings
Manual settings
NetRemote
PIN Setup
Network profile
Clear network
settings
Keep network
connected
3. Press the BACK button on the unit or remote control to cancel the setting and return back to the
previous menu.
EN
My EQ p rofile setup
Bass: 0
Treble: 0
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual config – select wireless network with DHCP enable/disable.
Select WPS on the unit and press the WPS button on the modem device
that you wish to connect with. Press SCROLL/SELECT dial on unit or
SELECT button on remote control to continue.
Display the settings on the unit.
Select wireless network with DHCP enable/disable.
To define a PIN number to be entered before being able to connect to the
unit remotely over a network
View the connected network.
To delete the connected network memory in Network profile.
To define whether remains connected to its network in Standby mode and
when not in Network radio mode.
Instructions Guide
Bass
Bass 0 dB
-14+ 0 14
11