Dell W2600 Manuel Du Propriétaire page 44

Message
No Card Detected in Card Reader
Remote Control Problems
Problem
The TV does not respond when
using the remote control
Problems With the Card Reader
Your card reader supports jpeg file formats and the following card types:
• Compact Flash
• Secure Digital
• Memory Stick
• Smart Media
• Multimedia Card (MMC)
Follow the installation instructions that came with your card reader. When you install the card
reader, locate the arrow on the front of the card reader and ensure that the arrow is pointing up
when you slide the card reader in to place.
When the card reader is installed, press Menu on the remote control, select Input Select, and then
select Card Reader.
All manuals and user guides at all-guides.com
Possible Solution
Remove and reinstall the card.
Ensure you are using a card that is supported by the
card reader. Your card reader supports the following
card types:
• Compact Flash
• Secure Digital
• Memory stick
• Smart Media
• Multimedia card
Possible Solution
1
Point the remote control directly at the lower right corner of
the TV. Be sure that nothing is blocking the front of the TV.
For the location of the IR, see "Front View" on page 5.
2
Verify that the batteries are properly installed.
3
If the batteries are old, install new batteries.
NOTE:
Bright lights or other infrared devices may interfere with
your remote control and IR on the TV.
Troubleshooting Your TV
43