Dell W2600 Manuel Du Propriétaire page 42

Problem
Picture is too dim or too bright
The screen is not centered correctly
Screen has one or more lines
The side panel buttons do not work
The picture is too small
All manuals and user guides at all-guides.com
Possible Solution
Update the color settings in the OSD. Press Menu
on the remote control and select Picture.
Update the size settings in the OSD. Press Menu
1
on the remote control and select Size.
Reset the original factory defaults. Press Menu
2
on the remote control, select Setup, and then
select Factory Reset.
1
Check the aspect ratio settings in the OSD. Press the
Menu button on the remote control and select Size.
For more information on using the OSD, see "Using
the On-Screen Display" on page 29.
Ensure the proper source is selected in the Input
2
Select menu. See "Input Select Menu" on page 30
for more information.
3
Try connecting a different device. Ensure that you
properly connect the cables and update the input
source in the OSD.
Update the size settings in the OSD. Press Menu on
4
the remote control and select Size.
Reset the original factory defaults. Press Menu on the
5
remote control, select Setup, and then select Factory
Reset.
Check the OSD to see if the buttons have been locked.
Press Menu on your remote control, select Setup.
If you are unable to use the remote control, press the
volume up and the channel up buttons on the side
of the TV for 10 seconds to unlock the buttons.
Adjust the size settings. Press Menu on the remote
1
control, and select Size.
2
This may be a problem with your device. See the
documentation for the device.
Troubleshooting Your TV
41