GLOBBER FOLDABLE PLUS Serie Mode D'emploi page 7

Steering: The child pushes with his feet on the floor to advance, while the child's
sitting on the seat. He must proceed with caution at first.
Notes:
- Always check the connector tube is securely inserted to the deck by pushing
downward without lifting up loosely.
- Pull up the seat from the deck without pressing the side push-button on the deck to
check that the seat connector tube is safely locked in place before use.
- Always check the seat knob is securely tightened.
- Remove the connector tube by pressing the side push-button on the deck.
- To remove the footrest, unscrew the knob on the footrest, then remove the footrest.
Once the footrest is removed, cover the hole in the deck with the button in-pack. (see
diagram 8-10)
- A GLOBBER cap is provided to cover the hole behind the seat while in ride-on mode.
This can be mounted onto the T-bar's column for storage. (see diagram E)
SCOOTER ASSEMBLY (see page 3)
- Insert the T-bar column into the integrated tube hole at the front of the scooter deck
between the two front wheels.
- Make sure the two spring balls on either side of the bottom of the column "click" into
place for scooter mode.
- To release the T-bar or fold/unfold the scooter, step on the deck with your foot,
press the push button on the side of the deck and pull the T-bar column back at a
30-degree angle. (see diagram 17-19)
Steering: GO•UP FOLDABLE PLUS' steering responds intuitively to the movement
of the body (Diagram B).
- When the child leans to the right, GO•UP FOLDABLE PLUS turns right!
- When the child leans to the left, GO•UP FOLDABLE PLUS turns left!
For the youngest children, on flat surfaces and in straight lines, GO•UP FOLDABLE
PLUS has a steering blocking system for better balance and to make learning easier.
- To lock, press the button above (Diagram C)
- To release, press the red button below (Diagram D)
During use:
- Standing on the scooter, one hand on each handle, push with one of your feet to
move forward. Proceed with caution at the start.
- Braking: a brake is located at the rear, when necessary press down on it to slow
down. Press down gradually in order to prevent skidding or loss of stability.
- Shoes are mandatory and we strongly advise you to wear trousers and long sleeve
shirts to avoid injury if you fall.
- Explain to the child clearly how to lock the scooter before any use.
Care / Maintenance:
Regular maintenance is a safety commitment:
- Wheel bearings: avoid going through water, oil or sand as this can damage wheel
bearings.
- Wheels: the wheels wear down with time and can be damaged if overly used on
rough surfaces. The back wheel on which the brake is applied is particularly affected
after several hours of braking. In the interests of safety, they should be checked
regularly and changed if necessary.
- Modifications: the original product must by no means be modified except for the
maintenance-related changes mentioned in these instructions.
- Nuts and axles: these should also be checked regularly. They can become loose
after a while in which case they should be tightened. They can become worn and not
tighten properly, in which case they should be replaced.
- Cleaning: Clean the scooter with a soft cloth and a little water.
Additional Info
For questions and inquiries please contact us at: contact@globber.com
WARRANTY
The manufacturer warranties this product to be free of manufacturing defects for
period of 2 years from date of purchase. This limited Warranty does not cover normal
wear and tear, tire, tube or cables, or any damage, failure or loss caused by improper
assembly, maintenance, or storage.
This Limited Warranty will be void if the product is ever
• used in a manner other than for recreation or transportation;
• modified in any way;
• rented
The manufacturer is not liable for incidental or consequential loss or damage due
directly or indirectly to the use of this product.
Globber does not offer an extended warranty. If you have purchased an extended
warranty, it must be honoured by the store at which it was purchased.
For your records, save your original sales receipt with this manual and write the
product name below.
...................................................................................
Spare parts
To order spare parts for this product, please visit our website www.globber.com
7