Publicité
7 - USING
7-1 Normal using
Valve functionment is fully automatic.
7-2 Security Stickers
Electrical Danger : 220/230V
7-3 Cleaning
Do not use a water jet under hight pressure for the cleaning of the valve
The equipment should be cleaned using cleaning agents that are compatible with the materials of the
supplied product. For the dilution percentages, refer to the instructions of the cleaning agents to be
used.
Material : Composite for the case
8 – MAINTENANCE
Maintenance must be carried out by qualified staff.
When replacing a component, choose the right component from the manufacturer's after-sales service,
and respect the instructions of the different sections in this instruction manual.
Check the flaps mobility and their tighteness at least once a month.
When starting or stoping the cold room, please follow the Local Regulations.
9 – SCRAPPING
Take all the European and national regulation texts into consideration, which deal with scrap and
packaging waste. Examples:
Directive relating to scrapping, 75/442/CEE.
Directive relating to electrical and electronic equipment waste, 2015/863/EU.
It is agreed that the buyer, keeping this equipment, shall ensure the financing and organization of
scrapping the waste from this equipment.
The buyer, on scrapping his waste, should keep proof of the full application of these regulation
obligations.
These materials give off harmful vapors during combustion.
75, rue de Richelieu - 75002 PARIS - FRANCE - Tél. :(33) 01 42 96 94 06 - Fax :(33) 01 42 86 84 51
Siège Social : Senlis (Oise) - Société Anonyme au capital de
Ref
Tube Cover
Case Cover
http://www.fermod.com - e-mail : contact@fermod.com
RCS Compiègne B 301 468 211 - Siret 301 468 211 00018 - APE 2572Z
Material
ABS
ABS
1 004 400 Euros
- 12 -
NM2260/K
Publicité
