Publicité
Les langues disponibles
Les langues disponibles
Step 19
Step
1
BLACK 1/2" FLAT HEAD SCREW
(12 used in this step)
2
CC
Fasten the EXTENSION SLIDES (2) to the LARGE
å
DRAWER SIDES (CC and DD). Use six BLACK 1/2"
FLAT HEAD SCREWS (27). Use the exact holes shown
in the upper view.
3
DD
EE
Slide the DRAWER BOTTOM (V) into the grooves in the
å
LARGE DRAWER SIDES (CC and DD) and LARGE
DRAWER BACK (EE).
Page 24
2
27
Open end
2
DD
These
holes
must be
here.
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the grooves.
V
CC
2
BLACK 1-3/8" FLAT HEAD SCREW
(8 used in this step)
16 used
7
Insert eight SMALL WOOD DOWELS (7) into the
å
LARGE DRAWER SIDES (CC and (DD) and LARGE
DRAWER BACK (EE) as shown.
Fasten the LARGE DRAWER SIDES (CC and DD) to
å
the LARGE DRAWER BACK (EE). Use four BLACK 1-3/8"
FLAT HEAD SCREWS (22).
NOTE: Be sure the WOOD DOWELS in the LARGE
å
DRAWER BACK inserts into the holes in the LARGE
DRAWER SIDES.
4
CC
Be sure the DRAWER
BOTTOM inserts
into the DRAWER
FRONT groove.
Fasten the LARGE DRAWER FRONT (BB) to the LARGE
å
DRAWER SIDES (CC and DD). Tighten four HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the LARGE
å
DRAWER SIDES insert into the holes in the LARGE
DRAWER FRONT.
Fasten a KNOB SET (9) to the LARGE DRAWER
å
FRONT (BB). Use a BLACK 1/2" MACHINE SCREW (29).
Repeat this step for the other large drawer.
å
www.sauder.com
22
EE
CC
BLACK 1/2" MACHINE SCREW
(2 used in this step)
DD
DD
Groove
29
BB
9
423526
Publicité
