Publicité
Les langues disponibles
Les langues disponibles
Step 18
Step
1
BLACK 1/2" FLAT HEAD SCREW
(12 used in this step)
2
X
Fasten the EXTENSION SLIDES (2) to the DRAWER
å
SIDES (X and Y). Use six BLACK 1/2" FLAT HEAD
SCREWS (27). Use the exact holes shown in the upper view.
3
Y
AA
Slide the DRAWER BOTTOM (V) into the grooves in the
å
DRAWER SIDES (X and Y) and DRAWER BACK (AA).
423526
2
27
Open end
2
Y
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the grooves.
V
X
2
These
holes
must be
here.
Fasten the DRAWER SIDES (X and Y) to the DRAWER
å
BACK (AA). Use four BLACK 1-3/8" FLAT HEAD
SCREWS (22).
4
X
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Fasten the DRAWER FRONT (W) to the DRAWER
å
SIDES (X and Y). Tighten four HIDDEN CAMS.
Fasten a KNOB SET (9) to the DRAWER FRONT (W). Use a
å
BLACK 1/2" MACHINE SCREW (29).
Repeat this step for the other drawer.
å
www.sauder.com
BLACK 1-3/8" FLAT HEAD SCREW
(8 used in this step)
AA
Y
BLACK 1/2" MACHINE SCREW
(2 used in this step)
Y
22
X
Groove
29
W
9
Page 23
Publicité
