Publicité
Les langues disponibles
Les langues disponibles
5.5. Requirements for Mounting
DANGER
Type
Basic
Mounting
Environment
Mounting
Structure
© 2023 Maxeon Solar Technologies, Ltd. All rights reserved. | 547143 Revision B - June 2023
Specifications included in this document are subject to change without notice
Despite careful construction, electrical devices can cause fires.
•
Do not mount the energy storage system in areas containing highly
flammable materials or gases.
•
Do not mount the system in potentially explosive atmospheres.
Requirements
•
The SunPower Reserve system is suitable for indoor and outdoor use.
•
Do not install the inverter in a place where a person can easily touch it
because its enclosure and cover can be very hot during operation.
•
Do not mount the system in areas with flammable or explosive
materials.
•
Do not mount the system at a place within children's reach.
•
Do not mount the system outdoors in salt areas because it will be
corroded there and may cause fire. A salt area refers to the region
within 500 m from the coast or prone to sea breeze.
•
The system must be mounted in a well-ventilated environment to
ensure good heat dissipation.
•
Do not mount the system in areas where it could be exposed to
sunlight, the power of the system may be derated due to additional
heat.
•
Mount the system in a sheltered place or mount an awning over the
product.
•
The optimal temperature range for the battery pack is from 15 °C to 30
°C and not exposed to sunlight.
•
Do not expose or place near water sources like downspouts or
sprinklers.
•
If the battery pack is mounted in an area where vehicles are present,
ensure mechanical protection from vehicles.
•
The mounting surface behind the system should not allow the
propagation of fire.
•
Ensure that the mounting floor is solid and able to bear the weight of
the system.
26
Publicité
