Télécharger Imprimer la page

GE Profile PLD617RT Manuel Du Propriétaire Et Instructions D'installation page 13

Publicité

Les langues disponibles

Les langues disponibles

Interior Surfaces
Oven Door
Door Interior and Exterior
Do not allow excess water to run into any of the holes
or slots in the door. Wipe dish soap over any baked-on
blade to clean it off. Then wipe over the glass with a
soapy cloth to remove any residue and dry off.
To Remove the Door:
2. Pull the hinge locks up and away from the range
frame to the unlocked position.
Pull hinge locks up to unlock
3. Firmly grasp both sides of the door near the top.
4. Close door until the top of the door is approximately 6"
from the range frame.
5. Lift door up and away from the range until both hinge
arms are clear of the slots in the range frame.
Removal position
49-2001047 Rev. 4
To Replace the Door
2. With the door at the same angle as the removal
position, rest the notch on the underside of the left
hinge arm on the bottom edge of the left hinge slot.
The notch in the hinge arm must be fully seated into
the bottom of the slot. Repeat for the right side.
edge of
slot
Rest notch on bottom edge
of hinge slot
3. Fully open the door. If the door will not fully open, the
notches in the bottoms of the hinge arms have not
seated correctly in the bottom edge of the slot. Lift the
door off the range and repeat previous step.
4. Push the hinge locks toward the range cavity and
down to the locked position.
Push hinge locks down to lock
5. Close the oven door.
Hinge arm

Publicité

loading

Ce manuel est également adapté pour:

Profile pld621rt