Polaris 2878839 Manuel D'installation page 6

FRONT BRUSHGUARD
KIT PN 2878839
INSTALLATION INSTRUCTIONS
1. Position and fasten the
flange bolts g and
(4) M8-1.25
FRONT VIEW
2. Position and fasten the middle section of the front brushguard  onto the left d and right e supports installed
in step 1 using
(4) M8-1.25 X 20 mm
FRONT VIEW
3. Position the taper block f onto the
end of the left brushguard section 
and fasten using a
M8-1.25 X 130 mm
Allen socket machine screw h and a
lock washer j. Tighten until the
M8
taper block f leaned against the left
section.
Do not overtighten to facilitate the
insertion.
7515243-418E
A-7515243
All manuals and user guides at all-guides.com
left d and right e supports onto the existing front bumper using
(2)
flange nylock nuts i (finger tighten at this time).
flange bolts g and flange nylock nuts i (finger tighten at this time).
(4) M8-1.25
LEFT FRONT
VIEW
- 2-
(4) M8-1.25 X 20 mm
Under View - Left Side
Imprimé en Chine / Printed in China