Publicité
A, B, C are printed on the groove of the wheel limit pile of the chassis. Wheel limit piles will be
installed by default on C (left) and A (right).
Wheel buckle
Zaklopka kolesa
Reža za
Wheel limit pile
omejitev koles
As shown in the figure, push the wheel buckle, pull down the wheel components, and remove them.
Nato v ogrodje ponovno nastavite režo, s katero opredelite novo smer vožnje.
PRIPOROČAMO ŠTIRI NASTAVITVE KOLES:
Setting 2: C-A, when the turning angle is too large
Nastavitev 1: privzete nastavitve: C-A, primerna za večino bazenovpools
Wheel
Kot kolesa
Angle
Pot
Running
path
NAVODILA ZA UPORABO
UTILISATION
Pritisnite zaklopko kolesa, povlecite navzdol sestavne
Then re-install the limit pile into chassis to realize the different running paths.
dele kolesa in jih odstranite, kot prikazuje slika.
b. Four settings for wheels are recommended:
Setting 1: default setting: B-C, for most of pools
Wheel Angle
Setting 2: C-A, when the turning angle is too large
Wheel
Angle
Running
Running path
path
7
186
Publicité
