Télécharger Imprimer la page

Orca 40 CL Notice D'utilisation Et D'entretien page 182

Publicité

PREVIDNOSTNI UKREPI
IV.
Operating
IV.
Operating
4.1. Precautions
KO ČISTILEC POSTAVITE V VODO, JE TREBA VODO V ENOTI IZPUSTITI KOT SLEDI:
a. When putting the cleaner into the pool, the air inside the cleaner should be discharged as follow:
4.1. Precautions
① Hold the cleaner and submerge it vertically for 5-6 seconds until no bubbles come out (Fig. 1).
a. When putting the cleaner into the pool, the air inside the cleaner should be discharged as follow:
1. Čistilec držite navpično pod vodo 5 do 6 sekund, dokler ne izpusti mehurčkov (slika 1).
② Press the switch button to power on and rotate the cleaner 90 degrees.
① Hold the cleaner and submerge it vertically for 5-6 seconds until no bubbles come out (Fig. 1).
2. Pritisnite na gumb za vklop in čistilec obrnite za 90 stopinj.
③ Submerge it horizontally into the pool floor until a large number of bubbles are discharged from
② Press the switch button to power on and rotate the cleaner 90 degrees.
3. Čistilec položite vodoravno na bazenska tla, dokler iz šobe ne uide večje število
the nozzle (Fig. 2).
mehurčkov (slika 2).
③ Submerge it horizontally into the pool floor until a large number of bubbles are discharged from
the nozzle (Fig. 2).
b. Put into or lift out of the pool with the cleaner bottom towards the wall to avoid any possible
ČISTILEC DVIGNITE TAKO, DA NJEGOV SPODNJI DEL GLEDA PROTI STENI BAZENA,
scratches to the pool.
DA BI TAKO PREPREČILI MOREBITNE POŠKODBE BAZENA.
b. Put into or lift out of the pool with the cleaner bottom towards the wall to avoid any possible
scratches to the pool.
C. Please ensure that the top cover of the cleaner is tightly assembled to its chassis.
NAVODILA ZA UPORABO
INSTALLATION
UTILISATION
instruction
instruction
Fig. 1
Fig. 1
Fig. 2
182
182
Fig. 2

Publicité

loading

Produits Connexes pour Orca 40 CL