Orca 40 CL Notice D'utilisation Et D'entretien page 155

Then re-install the limit pile into chassis to realize the different running paths.
b. Four settings for wheels are recommended:
Setting 1: default setting: B-C, for most of pools
2. nastavení: B-C, při příliš velkém úhlu natočení
Wheel Angle
Úhel kolečka
Dráha
Setting 3: C-C, when the length and width of the swimming pool are large
Running path
3. nastavení: C-C, při velké délce a šířce bazénu
Wheel Angle
Úhel kolečka
Dráha
Running route
POKYNY PRO POUŽITÍ ENTRETIEN
Setting 2: C-A, when the turning angle is too large
Wheel
Angle
Running
path
Setting 3: C-C, when the length and width of the swimming pool are large
Wheel Angle
Running route
9
8
155