Lux Tools V-AKS 18-20 Traduction De La Notice Originale page 75

All manuals and user guides at all-guides.com
Kettensaege_Akku_467351.book Seite 75 Mittwoch, 25. August 2010 10:19 10
Cleaning and maintenance overview
After each use
What?
Clean the device
Annually
What?
Re-tension saw chain
Clean oil guide groove of the saw rail.
Sharpen the saw chain.
Cleaning
Cleaning the device
– Remove coarse dirt.
– Wipe down the device with a slightly damp cloth.
Cleaning the oil guide groove of the saw rail
– Remove the saw rail.
– Clean dirt from the oil guide groove of the saw rail with a suitable tool. (plastic spatula, do not use
any steel tools!)
– Replace saw rail(► Assembling the saw rail and saw chain – p. 68).
Charging the battery
► P. 6, item 9
Risk of injury!
Comply with all safety instructions when handling rechargeable devices.
Danger!
Note:
The battery must be charged prior to the first start-up.
(Charging period: ► Technical data – p. 78).
Remove the battery from the charging station after charging to avoid it being discharged.
1. Remove the battery from the device.
2. Insert the battery into the charging station.
The charging station shows the state of charge of the battery.
Charging period: ► Technical data – p. 78
How?
► Cleaning the device – p. 75
How?
► Re-tensioning the saw chain – p. 76
► Cleaning the oil guide groove of the saw rail –
p. 75
► Sharpening the saw chain – p. 76
75