Lux Tools V-AKS 18-20 Traduction De La Notice Originale page 65

All manuals and user guides at all-guides.com
Kettensaege_Akku_467351.book Seite 65 Mittwoch, 25. August 2010 10:19 10
• Only use original replacement parts. Only these replacement parts are designed and suitable for the
device. Other replacement parts will not only lead to an invalidation of the warranty, they may also
endanger you and your environment.
Device-specific safety instructions
• Young people under 18 years of age and users who are not sufficiently acquainted with its operation
must not use the device
• Make sure that the device is assembled completely and according to regulations.
• Check the device to ensure that it works correctly, especially check the correct and secure fit of the
chain rail, saw chain tensioned according to regulations.
• Check all screw connections regularly to ensure tight fit.
• Before use, ensure that there are no people or animals in the work area.
• Make certain that the work area is free of obstacles.
• Always keep an eye on your surroundings in order to ensure that you are not endangering any peo-
ple or animals with your work.
• No other persons or animals may be present within an area of 15 m around the cutting area, as they
may otherwise by hit by objects being slung away.
• Never work in poor light or weather conditions.
• Only saw wood. Do not use the chain saw for work for which it is not intended.
• Keep the handles dry, clean and free of oil and grease. Greasy, oily handles are slippery and cause
loss of control.
• Avoid sawing in bushes, since here small branches may get caught in the saw chain and they can
fly out uncontrolled.
• Make sure that you can stand firmly and safely in each work position. When working on a sloping
subsurface, be especially careful!
• Always hold the device firmly in both hands. Use your right hand to grip the rear handle, your left
hand to grip the other handle, even if you are left-handed. Do not let go of the handles!
• When the saw is running, keep all body parts away from the saw chain. Make sure before starting
the saw that the saw chain does not touch anything.
• Never saw above shoulder height! Do not lean forward or back!
• Always ensure that you are standing firmly and only use the chain saw when you are standing on
stable, firm and level ground. A slippery subsurface or instable standing area such as on a ladder
can cause you to lose your balance or lose control over the chain saw.
• Do not stretch your arms too far forwards.
• Never work on ladders, on trees or in other positions in which you cannot stand safely.
• Take care when walking backwards. Danger of stumbling!
• Always saw at a high chain speed.
• Do not saw any wood which is under tension.
65