I Clock Basics
(The clock system is 12-hours.)
Initial Time Setting
© Press DISP. "ADJUST" is displayed.
©Press and hold DISP again for more
than 2 seconds, "12" blinks indicating
the time setting mode is activated.
©To set hours, press "vTUNE" or
"TUNEa" .
© Press DISP again for minute setting.
©To set minutes, press "vTUNE" or
"TUNEa" .
Hold 'TUNE/'v" or "vTUNE" to change numbers rapidly.
©When you have set the time, press DISP.
Resetting the Time
When you want to reset the time, press and hold DISP for more than
2 seconds to activate the time setting mode. Then, repeat step © to
© above.
Selecting the Clock Display
Press DISP for clock display.
Press DISP once again, the current audio display mode resumes.
When power is turned off while the time is displayed, the clock mode
remains on.
14
CQ-DPG550/DPG500EUC