Panasonic S-36PY2E5A Manuel D'instructions page 6

Adjusting Airflow Direction
This section is described in the instruction manual supplied with the high-spec wired remote controller (CZ-RTC3).
Regarding the timer remote contoller (CZ-RTC2), refer to the Operating Instructions supplied with the model CZ-RTC2.
Adjusting the upward and downward motion of airflow direction
„ Using the high-spec wired remote
controller
Press the
6
All manuals and user guides at all-guides.com
Press
Airflow
direction
display
twice to select the FLAP.
Recommended vertical airflow direction
z
z
/ to select your desired airflow direction.
Flap fixed
(5 levels)
Set the flap to the downward position for heating operation.
(With the upward setting, warm air cannot reach the floor.)
Set the flap to the upward position for cooling operation.
(With the downward setting, condensation may drip on to the
floor.)
HEAT COOL / DRY
Recommended
Recommended
Display when swing operation
is stopped
Fan and Cooling and
heating drying
(5 levels) (3 levels)
STOP
Flap swing motion
Pressing or
z
during swing can stop
the flap at your preferred
position.
STOP
FAN
Fixed to this
position