Bosch GTC600C Consignes D'utilisation/De Sécurité page 6

correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving an-
tenna.
• Increase the separation between the
equipment and receiver.
This device complies with Industry Canada's
licence-exempt RSSs. Operation is subject
to the following two conditions:
(1) This device may not cause interference;
and
This thermal imaging camera is designed
for the contactless measurement of surface
temperatures.
The displayed thermal image shows the tem-
perature distribution of the area captured
by the infrared lens and therefore enables
temperature deviations to be depicted in dif-
ferent colors.
When used correctly, this makes it possible
to examine areas and objects in a contact-
less manner for temperature differences and
discrepancies in order to make components
and/or any weaknesses visible, including:
• Thermal insulation and other types of in-
sulation (e.g. locating thermal bridges)
• Active heating and hot water pipes (e.g.
underfloor heating) in floors and walls
FCC Caution
Industry Canada (IC)
(2) This device must accept any interference,
including interference that may cause unde-
sired operation of the device.
Intended Use
The tool must not be used for temperature
measurement on persons and animals or for
other medical purposes.
The tool is not suitable for surface tempera-
ture measurement of gases or liquids.
SAVE THESE INSTRUCTIONS
-6-
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
• Overheated electrical components (e.g.
fuses or terminals)
• Machine parts (e.g. overheating due to
faulty ball bearings)