Bosch GTC600C Consignes D'utilisation/De Sécurité page 2

The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
General Safety Rules . . . . . . . . . . . . . . . . 3
Safety Rules for Thermal Imaging
Cameras . . . . . . . . . . . . . . . . . . . . . . . 4
FCC Caution . . . . . . . . . . . . . . . . . . . . . . 5
Industry Canada (IC) . . . . . . . . . . . . . . . . 6
Intended Use . . . . . . . . . . . . . . . . . . . . . . 6
Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . 7
Getting to Know Your GTC600C
Thermal Imaging Camera . . . . . . . . . . 8
Specifications . . . . . . . . . . . . . . . . . . . . 10
Definitions . . . . . . . . . . . . . . . . . . . . . . . 12
Infrared Thermal Radiation . . . . . . . . 12
Emissivity Degree . . . . . . . . . . . . . . . 12
Thermal Bridge . . . . . . . . . . . . . . . . . 12
Reflected Temperature/
Reflectivity of an Object . . . . . . . 12
Distance from the Object . . . . . . . . . 12
Preparation . . . . . . . . . . . . . . . . . . . . . . 13
Power Supply . . . . . . . . . . . . . . . . . . 13
Inserting/Changing the Coin Cell . . . 13
Operation . . . . . . . . . . . . . . . . . . . . . . . 14
Initial Operation . . . . . . . . . . . . . . . . 14
Preparing for Measurement. . . . . . . . 15
Assigning Temperatures on the
Basis of the Scale . . . . . . . . . . . . 16
Safety Symbols
This is the safety alert symbol. It is used to alert you to po-
tential personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Table of Contents
-2-
Functions. . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting the Color Display . . . . . . . 17
Superimposition of Thermal
Image and Real Image . . . . . . . . . 17
Fixing the Scale . . . . . . . . . . . . . . . . 17
Measuring Functions. . . . . . . . . . . . . 17
Main Menu . . . . . . . . . . . . . . . . . . . . 18
Updating the Measuring Tool
Software . . . . . . . . . . . . . . . . . . . 19
Documenting Measurements. . . . . . . 19
Data Transfer . . . . . . . . . . . . . . . . . . 21
Maintenance and Service . . . . . . . . . . . . 22
Environment Protection . . . . . . . . . . 22
Troubleshooting . . . . . . . . . . . . . . . . . . . 23
Glossary of Terms . . . . . . . . . . . . . . . . . 24