Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION – PRECAUTIONS
This product is artistically made in conformity to applicable
CEE rules and is manufactured to allow rooms and similar
air change, wherever the product is installed. Please
follow all these indications to ensure performance,
mechanical and electrical reliability and keep always this
instruction leaflet. Do not use this product for different
application unless indicated by us.
1. Remove packing and make sure that the appliance is
undamaged.
2. Check that your electrical voltage and frequency
correspond to those marked on the fan rating label;
Install the product so that the blades are at a height of
at least 1,5 m above the floor.
3. This appliance must only be used for the purpose it
was built for, i.e. air replacement for domestic and
similar purposes.
4. Do not operate the appliance in the presence of
inflammable vapors (alcohol, petrol, etc.).
5. Before carrying out any cleaning or maintenance
disconnect the mains electrical supply to the fan by
means of a double pole switch or remove the plug. Any
maintenance and cleaning operation that requires
dismounting the unit must only be done by someone
who is a property qualified person.
6. Make sure you have completely assembled the product
before running.
7. Periodically, at least once a year or more frequently in
case of heavy use, remove dirt and incrustation from
the impeller and motor casing and, if necessary, clean
or replace the filter. It is also very important to make
sure the impeller is not deformed or cracked, is able to
rotate freely and without oscillation, and is properly
fixed to the shaft.
8. When the appliance is out of use, remove the power
lead. Moreover, make potentially dangerous parts
harmless, especially with regard to children who might
play with appliance when it is not in use.
43
Publicité
