Publicité
Les langues disponibles
Les langues disponibles
Operating the air cooler
Insert plug to the electrical outlet. Press the "On-Off" button to switch the unit"On". The LED
indicator automatically shows the room temperature and shifts the fan to stand by position.
The function of the unit can be controlled via on board control panel or by remote.
1. On/Off：Pressing the "On" button on the control panel or pressing the On/Off button on
the remote control will turn he unit ON at intermediate speed. After few minutes, the fan
will drop to show speed or to the pre-programmed memory setting. To switch back the
standby position, simply press the "Off" button on control panel or press the "On/Off"
button on remote control.
2. Speed: Press this key to choose between high, medium and low fan speed. Each time
the "Speed" button is pressed, an icon will appear on the LED screen indicating the
current speed level.
3. Wind：Press the "Wind" button to choose the type. Indicator light will display the selected
type of wind;
Normal：A continuous wind blow that can be adjusted to low，med and high speed.
Natural：Nature setting provides a soft and comfortable environment with a selection of
low, medium and high speed.
Sleep：
1.WHEN SPEED HIGH，After 30 minutes of operation in the high-grade state of natural
wind, it will be transferred to the mid-range operation of natural wind, and after 30
minutes, it will be transferred to the low-grade operation of natural wind, and then
continue to operate in the low-grade state of natural wind.
2.When the wind speed is in the medium range, it shall run in the medium range of
natural wind for 30min, and then turn to the low range of natural wind, and continue to run
in the low range of natural wind.
3.When the wind speed is low, continue to operate in the low natural wind speed.
4. Timer：Press "Timer" button to set the fan between 1-12 hours, the indicator light will
Publicité
