Publicité
Les langues disponibles
Les langues disponibles
2. Unplug the power cord plug before taking out the water tank.
3. Do not insert any objects to the ventilation or exhaust opening for this may damage the
product and could cause and electrical shock or fire.
4. Do not operate your unit with a cover on it as this may result to overheat and motor
damage.
5. The plug must be removed from the electrical outlet when not in use and before moving,
installing, uninstalling and cleaning.
6. Do not add any chemical or metal ingredients into the water tank. These materials are
dangerous and may cause problems.
7. Be careful not to expose infant and elder directly to the air cooler for a long time.
8. This appliance should be used under the rated voltage and frequency as indicated in
rating label.
9. This appliance is not intended for use of persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance.
10. Do not use your air cooler in or around water may cause electric shock and risk of fire.
11. Do not pull while the power is on. Always ensure that the plug is fully inserted into the
electrical outlet before operating.
12. Do not attempt to disassemble, repair or modify this appliance for the warranty will be
void if repair is carried out by unauthorized person/services.
13. Do not leave your unit under direct sunlight for a long time.
14. Before using the evaporative air cooler, always ensure that it contains water. Clean the
tank with fresh tap water every two weeks.
Cleaning and Maintenance
Dusts may accumulate in the dust filter or cooling pad after some time and may affect the
cooler's function. Therefore it is recommended to clean your evaporative cooler regularly.
Below are written steps on how to clean this unit；
Turn off the air cooler and unplug the power cord before beginning to clean.
1. Dust Filter
To remove the dust filter, Use mild cleaning agent and soft brush in removing the dust and
dirt on the filter. When done, first attach the bottom part of filter then push the upper part to
secure it.
2. Cooling Pad
After removing the dust filter you can see the cooling pad. Press the lock in the middle and
gently pull out the pad. Use a clean cloth or soft brush to remove dust and dirt from the pad.
Rinse with clean water if needed and leave open air dry. Never use any harmful chemical
solution for may cause damage to the pad.
Your cooler takes water from narrow section of the tank and pumps it on the cooling pad.
The water flowing through the cooling pad goes down to the large section of the tank. The
cycle results to absorption of dust and dirt in the air which makes the air safer and fresher to
breathe. The filter that is located at the middle portion of the tank cleanses the water that
passes through it and should be attached to its place upon use of the unit.
Publicité
