Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Replace immediately the door glass panels
when they are damaged. Contact the
Authorised Service Centre.
Clean the appliance with a moist soft
cloth. Use only neutral detergents. Do not
use abrasive products, abrasive cleaning
pads, solvents or metal objects. Do not clean
the catalytic enamel with detergents (if
applicable). Fat and food remaining in the
appliance can cause fire. Do not remove the
knobs from the appliance (if applicable). If
you use an oven spray, follow the safety
instructions on its packaging.
Installation
The appliance must be handled and
installed by two or more persons - risk of
injury. Always use safety gloves and
enclosed footwear - risk of cuts.
Installation, including water supply (if
any) and electrical connections, service or
repair operation that involves the removal of
a cover which gives protection against
exposure to microwave energy (if any) and
repairs must be carried out by the
authorised installer. Follow the assembly
instructions supplied with the appliance.
Remove all the packaging. Make sure that
the appliance has not been damaged during
transport. In the event of problems, contact
the dealer or your nearest Authorised
Service Centre. Do not install or use a
damaged appliance.
Install the appliance in a safe and
suitable place that meets installation
Electrical warnings
Risk of fire and electric shock.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power supply.
To download the full version visit www.ikea.com
Before disposal, remove the door catch
to prevent children or pets from becoming
trapped in the appliance - the risk of injury
or suffocation.
Steam cooking: Released Steam can
cause burns. Do not open the appliance door
during the steam cooking operation. Open
the appliance door with care after the steam
cooking operation.
requirements. Do not use the appliance
before installing it in the built-in structure.
Do not pull the appliance by the handle.
Keep the minimum distance from other
appliances and units. Before mounting the
appliance, check if the oven door opens
without restraint.
Ensure that the appliance is switched off
and disconnected from the power supply
before performing any maintenance
operation - risk of electric shock. During
installation, make sure the appliance does
not damage the power cable - risk of fire or
electric shock. Only activate the appliance
when the installation has been completed.
Do not obstruct the minimum gap
between the worktop and the upper edge of
the oven - risk of burns.
Do not use extension leads, multi-plug
sockets or adapters. Do not operate the
appliance if it has a damaged power cable or
plug, if it is not working properly, or if it has
been damaged or dropped. The appliance
must be earthed. Always use a correctly
installed shockproof socket. The shock
6
Publicité
