Moulinex zelio MO4013T1 Mode D'emploi page 13

TROUBLESHOOTING
1. I
F YOUR VACUUM CLEANER DOES NOT START
• The appliance is not plugged-in, check
that the appliance is correctly plugged in.
2. I
F THERE IS NO SUCTION
• An accessory or the tube is clogged.
Unclog the accessory tube or flexible hose.
• The lid was not closed properly: check that
the bag is properly installed and close the
lid again.
3. I
F THE SUCTION OF YOUR VACUUM CLEANER
,
HAS DROPPED
WHISTLES
• An accessory or the flexible hose is partially
clogged. Unclog the accessory tube or
flexible hose.
• The bag is full or saturated with fine dust.
Put a new bag in or empty the fabric dust
bag.
• The foam-filter is saturated. Clean the
foam-filter.
• If the bag fill indicator is red, the filtration
system is saturated.
- The HEPA* cassette: change the Hepa*
cassette (ref. MT0001 01) and put it back in
its housing.
- Washable HEPA* filter cassette: clean or
change the washable HEPA filter cassette
(ref. MT0004 01) and put it back in its housing.
- The microfilter cassette*: withdraw the
microfilter from the cassette, and change it
(ref. MT0001 01). Wash the grey foam filter,
WARRANTY
• This product has been designed for
domestic use only. Any professional use,
innapropriate use or failure to comply with
the instructions, the manufacturer accepts
no responsibility and the guarantee will not
apply.
12
IT MAKES A NOISE AND
squeeze it out and leave it to dry for at least
12 hours. Then re-fit the cassette in its
housing.
• The electronic variable suction power
selector is in the minimum position.
Increase the power with the help of the
electronic variable suction power selector
(except if you are vacuuming delicate
fabrics).
• If the mechanical power regulator on the
power nozzle is open, close the mechanical
power regulator.
4. I
F THE BAG FILL INDICATOR REMAINS RED
• The bag is full: replace the bag or clean
the bag*.
5. I
F THE FLOOR HEAD IS HARD TO MOVE
AROUND
• Open the suction regulator on the handle
or reduce power.
6. I
F THE POWER CABLE DOES NOT REWIND
COMPLETELY
• The power cable is slow in reentering its
housing. Pull the cable back out and press
on the automatic cable rewind pedal.
If you have any product problems or queries,
please contact our customer Relations Team
first for expert help and advice (see the
contact details on the last page).
• Read the instructions for use carefully
before using your appliance for the first
time: any use which does not conform to
these instructions will absolve Moulinex
from any liability.