Publicité
Les langues disponibles
Les langues disponibles
1. Read all instructions before beginning installation.
2. Be certain that basin is on a firm level surface.
3. Do not use an automatic plumbing vent device.
4. Do not over-torque lid attachment screws.
5. Always use a check valve on the discharge line.
6. Test operation of pump per STEP 6.
1. DO read all installation material included with the pump.
2. DO inspect unit for any visible damage caused by shipping.
Contact dealer if unit appears to be damaged.
3. DO clean all debris from the basin and pump.
4. DO always disconnect pump from power source before handling.
DO always connect to a separately protected and properly
grounded ground fault protected circuit. DO NOT ever cut, splice
or damage power cord. DO NOT carry or lift pump by its power
cord. DO NOT use an extension cord.
PUMP PERFORMANCE CURVE
104/105/106/110/115/120/131
25
20
6
15
4
10
2
5
0
10
20
GALLONS
LITERS
0
80
Ten Helpful Hints For Easy Installation
Do's And Don't's For Installing A Unit
Performance Characteristics
104
131
105/106/
110/115/120
30
40
50
60
70
160
240
FLOW PER MINUTE
© Copyright 2023 Zoeller
7. Always provide some means to disconnect basin from plumbing
for maintenance purposes.
8. Run unit at least once a month to verify proper operation.
9. The model number and date code can be found on the lid warning
label.
10. Plug pump into a properly grounded GFCI receptacle.
5. DO NOT use a discharge pipe smaller than the pump discharge
size.
6. DO test pump immediately after installation to be sure that the
system is working properly.
7. DO review all applicable local and national codes and verify that
the installation conforms to each of them.
8. DO NOT install unit in the ground.
MODELS
Feet
Meters
Gal.
5
1.5
38
10
3.0
30
15
4.6
14
20
6.1
--
Shut-off Head:
18 ft. (5.5m)
80
Co. All rights reserved.
®
3
105/106
104
110/115/120
Liters
Gal.
Liters
Gal.
144
43
163
72
114
34
129
61
53
19
72
45
--
--
--
25
19.25 ft. (5.9m)
23 ft. (7.0m)
131
Liters
273
231
170
95
009898
Publicité
