Silverline 261812 Mode D'emploi page 6

261812
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result in
a hazardous situation.
WARNING: When used in Australia or New Zealand, it is recommended that this tool is ALWAYS
supplied via Residual Current Device (RCD) with a rated residual current of 30mA or less.
Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is mainvtained.
Planer Safety
WARNING: ALWAYS switch off and allow the blades to come to a complete standstill before
attempting any adjustments, cleaning or carrying out maintenance.
WARNING: A dust mask and dust extraction system are strongly recommended during usage
to protect the operator against dust. Electric planers generate a large quantity of dust and some
materials will produce toxic dust.
WARNING: Wait for the cutter to stop before setting the tool down. An exposed rotating cutter may
engage the surface leading to possible loss of control and serious injury.
WARNING: Hold the power tool by insulated handles or gripping surfaces only, because the cutter
may contact its own cord. Cutting a "live" wire may make exposed metal parts of the power tool
'live' and could give the operator an electric shock.
WARNING: Use clamps or another practical way to secure the workpiece to a stable platform.
Holding the work by your hand or against the body leaves it unstable and may lead to loss of
control.
a) Ensure all nails, screws etc are removed from the workpiece before commencing the
task. Otherwise, damage to the blade or planer could occur, causing a safety hazard
b) Ensure all cloth, cord, rags, string and similar items are removed from the work area
to prevent entanglement in the planer mechanism
c) Handle blades with caution
WARNING: ALWAYS disconnect the tool from the power supply before accessing blades or guards.
d) Ensure that the blade installation bolts are securely tightened before operation
e) Before using the planer on a workpiece, switch on and allow it to run for a while.
Check for vibration or wobbling that could indicate a badly installed, or a poorly balanced
blade
f) Allow the machine to reach full speed before making contact with the workpiece and
starting cutting
g) Operate the planer only when controlled by both hands
h) Ensure the planer is at least 200mm away from your face and body
i) Shavings may jam in the chute when cutting damp wood. Switch off, disconnect from
the power supply and clean out the chips with a stick
WARNING: Never put your finger into the chip chute.
j) ALWAYS switch off and allow the blades to come to a complete standstill before
attempting any adjustments, cleaning or carrying out maintenance
k) ALWAYS disconnect from the power supply when leaving the machine unattended
l) When not in use, disconnect from the power source and place the front base on a
wooden block so that the blades are not in contact with anything
m) Replace all blades at the same time, otherwise the resulting imbalance will cause
vibration and shorten the service life of planer and blades
All manuals and user guides at all-guides.com
www.silverlinetools.com
Product Familiarisation
1 Dust Bag
2 Machine Casing
3
Dust Extraction Port
4 Main Handle
5 Safety Lock-Off Button
6
On/Off Trigger Switch
7 Drive Belt Cover
8 Spare Brushes
9 Spanner and Hex Keys
10 Spare Drive Belt
11 Guide Fence Angle Bracket
12 T-Grip Screw (x 2)
13 Guide Fence
14 Depth Adjustment Handle
15 Rebate Depth Gauge
16 Wing Nut & Bolt
17 Clamp Bolts
18 Blade Clamp
19 Sole Plate
20 Guard
21 Chamfer Groove
Intended Use
Hand-held electric planer, designed for light and medium duty planing tasks of hard and soft wood.
Unpacking your Tool
• Carefully unpack and inspect your new sander. Familiarise yourself with all its features and
functions
• Ensure that all parts of the tool are present and in good condition. If any parts are missing or
damaged, have such parts replaced before attempting to use this tool
Before Use
WARNING: Ensure the planer is disconnected from the power supply before attaching or changing
any accessories, or making any adjustments.
• This planer is supplied fully assembled, apart from the accessory for dust extraction
• Connecting the dust bag
• Prior to use, fit the Dust Bag (1) to the Dust Extraction Port (3)
Note: Empty the Dust Bag (1) frequently during use, before taking breaks and after completion
of planing.
WARNING: Dust may be an explosion hazard. DO NOT throw sanding dust into an open fire.
Spontaneous combustion may occur when oil or water particles come into contact with dust
particles. Dispose of waste materials carefully and in accordance with local laws and regulations.
Fitting the rebate depth gauge
1. Use a T-Grip Screw (12) to fit the Rebate Depth Gauge (15) into position on left of planer
body (when viewed from the front)
2. Ensure the gauge fits in the groove in the planer body
3. Set the required rebate depth using the scale on the rebate guide and the arrow marked
on the housing
Fitting the guide fence
1. Use the other T-Grip Screw to fit the Guide Fence Angle Bracket (11) into position on right of
planer body (when viewed from the front)
2. Ensure the bracket fits in the groove in the planer body
3. Use the bolt and wing nut to fix the Guide Fence (13) to the angle bracket
4. Ensure the square shoulder of the bolt is completely engaged within the square opening in
the angle bracket and that the bracket is fitted within the raised profile of the Guide Fence
5. Adjust the position of the fence to provide the required cutting width
Adjusting the cutting depth
WARNING: ALWAYS ensure the tool is switched off and disconnected from the power supply, before
attempting to adjust the depth of cut. NEVER adjust the depth of cut when the tool is running.
900W Planer
5