ABB Busch Prasenz EIB 6131 102-500 GJ B000 6132 A0137 Serie Mode D'emploi page 69

Interruption of Bus Voltage
8.1 Behaviour in the case of Bus Voltage Recovery
If voltage is interrupted, the Presence Detector behaves as follows:
a. Interruption ≤ 200 ms
- No change in the control state
b. Interruption > 200 ms
"Light" potentiometer is set to
- between 10 s and 1 min:
Irrespective of the brightness measurement, the lighting will be switched on for one
minute (after 17 seconds initialization). The Presence Detector then returns to its
normal mode of functioning.
- a value ≥ 1 min:
Irrespective of the brightness measurement, the lighting will be switched on in
accordance with the switch-off delay set on the "Light" potentiometer (plus 17 seconds
initialization). The Presence Detector then returns to its normal mode of functioning.
GB
69