All manuals and user guides at all-guides.com
KDP8 - 2/3 wires detector
Motion detector wall switch
Dismantle the plastic frame
To dismantle a fixed KDP8, please put the head of screwdriver at the nick
of frame, then prize up the frame. To remove a flush mounted or surface
mounted on junction box (JB-40) of KDP8, please refer to FIG.16-A &
FIG.16-B respectively.
Operation
Knob setting
METER、TIME、LUX knob (See FIG.17).
Note:
Make sure the slide switch is on the position of AUTO while adjusting the
knob, otherwise, the settings on METER, TIME and LUX knob are disabled.
Instructions manual |
28
www.grupotemper.com