Kohler K-1360-H2 Guide De Propriétaire page 3

Whirlpool Flexjet Mode
Your Kohler Whirlpool
The whirlpool is equipped with the following components:
• Bath - The bath acts as a reservoir for water and provides a location for the hydro-massage action.
• User Keypad - Located within easy reach, the keypad allows you to turn the whirlpool on and off.
It also allows you to access all the whirlpool modes and regulate the water flow or pulse speed.
Available modes will be illuminated in blue. Active modes will be illuminated in green.
• Pump Motors - The pump motors provide quiet, variable speed power to circulate the water and
create the soothing hydro-massage action. Your whirlpool uses two pump motors. One pump motor
powers the Waterfall and the second pump propels water through the Flexjets and Riverjets.
• Heater - The heater is designed to automatically help maintain the temperature of the water up to
104°F (40°C) to enhance your hydro-massage experience. The heater turns on automatically when
the Flexjet/Riverjet pump is operating, and turns off when the pump motor is turned off. The heater
may be turned off through the keypad at any time while the pumps are operating.
• Pillows - The pillows provide a comfortable place to rest your head as you relax.
• Remote Control - The waterproof remote control brings all the whirlpool features to your fingertips.
• Chromatherapy (H2 Models) - Add ambience to your bath with lights that automatically and
continuously cycle through the eight colors, or select just one color: white, violet, indigo blue, aqua
blue, green, yellow, orange, and red. One cycle through all eight colors takes approximately one
minute. This mode may be used with all modes of operation and also when the pumps are not
operating.
Your bath offers several distinct whirlpool experiences:
• Waterfall Mode - A continuous stream of water (less heat) flows behind the neck at a medium
volume within seconds. This mode may be used alone or with the Flexjet Flow Mode, Riverjet -
Whitewater Mode, or Riverjet - Rapids Mode.
• Whirlpool Flexjet Mode - An immediate invigorating whirlpool action is created at a medium
volume. The eight Flexjets are located lower in your whirlpool than the Riverjets. Positioned to
optimize their hydro-massage effect, the jets allow you to adjust the air and water flow and control
the flow direction as you desire.
• Riverjets - Whitewater Mode - A swirling action from the two outside Riverjets is created behind
the neck at a medium volume.
• Riverjets - Rapids Mode - A swirling action from all four Riverjets is created behind the neck.
• Tidepool - Turns off the air flow to the jets for a soothing, relaxing effect (not illustrated). This mode
may be used at any time while any of the jets are operating. This mode does not affect the Waterfall
mode.
Kohler Co.
All manuals and user guides at all-guides.com
Waterfall Mode Riverjets - Whitewater Mode
3
Riverjets - Rapids Mode
1022211-5-F