Whittier Wood Products 225W Instructions De Montage page 3

All manuals and user guides at all-guides.com
225W / 226W
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
Phillips Head Screwdriver, Mallet or Padded Hammer and Tape Measure.
Optional: Drill & 3/16" Drill Bit
IMPORTANT:
We recommend finishing the unit before final assembly. Before finishing, read the
enclosed Finishing Hints sheet.
Note: Due to the fact that more than one type of hardwood is used,
we recommend testing for desired color.
To test for desired color on:
a) Veneer parts – apply stain to unexposed portion of the Top. See FIGURE 2.
b) Alder pieces – apply stain to back of Crown. See FIGURE 2.
226W Standard 3-Shelf
Hutch shown in all
drawings.
FIG. 1
1. Lay out the wood parts in their approximate locations to aid in the identification and assembly.
225W/226W — Page 3