Hilti AG 500-A22 Mode D'emploi Original page 14

3.5 Guard with front cover
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications,
use the standard guard with front cover.
3.6 DC-EX 125/5"C compact dust hood for cutting (accessory)
When cutting mineral materials with diamond cutting discs, use the DC-EX 125/5" C compact hood.
CAUTION Use of this hood for working on metal is prohibited.
3.7 DG-EX 125/5" dust hood for grinding (accessory)
The grinding system is suitable only for occasional use with diamond cup wheels for grinding mineral
materials.
CAUTION Use of this hood for working on metal is prohibited.
3.8 Li-ion battery charge status display
The charge status of the Li­ion battery is displayed after one of the two battery release buttons is pressed.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights up.
1 LED blinks.
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs blink, please refer to the information given in the
Troubleshooting section.
4 Consumables
Only synthetic resin-bonded, fiber-reinforced discs with a maximum Ø of 5" which are approved for use at a
rotational speed of at least 11000/min and a peripheral speed of 80 m/s may be used.
The maximum grinding disc thickness is 1/4" and the maximum cutting disc thickness is 1/8".
WARNING! When cutting or slitting with abrasive cutting discs always use the standard guard with
the additional front cover, or a fully enclosing dust hood.
Discs
Abrasive cutting disc
Diamond cutting disc
Abrasive grinding disc
Diamond grinding disc
Wire brushes
Suitability of discs for the equipment used
Item Equipment
A Guard
8 English
2
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
Application
Cutting, slitting
Cutting, slitting
Rough grinding
Rough grinding
Wire brushes
AC­D AG-D AF-D
X X X
3
4
Designation
AC­D
DC-TP, DC-D (SPX,
SP, P)
AG-D, AF-D, AN-D,
AG-D type 27
DG-CW (SPX, SP,
P)
3CS, 4CS, 3SS,
4SS
AN-D DG- DC-TP,
CW DC-D
(SPX, (SPX,
SP, P) SP, P)
X X X
2149239
*2149239*
Material
Metal
Mineral
Metal
Mineral
Metal
3CS, AG-D
3SS, type 27
4CS,
4SS
X —