Télécharger Imprimer la page

Costway FP10040 Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

• The panels of the adjacent cabinets must be made of
heat-resistant material. In particular, cabinets with a veneer
exterior must be assembled with glues which can withstand
temperatures of up to 212°F/100°C.
• In compliance with current safety standards, contact with the
electrical parts of the oven must not be possible once it has been
installed.
• All parts, which ensure the safe operation of the appliance, must
be removable only with the aid of a tool.
• To fasten the oven to the cabinet, open the door of the oven and
attach it by inserting the 4 wooden screws into the 4 holes located
on the perimeter of the frame.
ELECTRICAL REQUIREMENTS
WARNING: Electrical Shock Hazard
DO NOT use an extension cord.
• Failure to follow these instructions can result in death, fire, or
electrical shock.
• Any additions, changes or conversions required in order for this
appliance to satisfactorily meet the application needs must be
12
Figure 2
1.8"
(45 mm)
made by a qualified service personnel in accordance with the
manufacturer's instructions and all codes and requirements of the
authority having jurisdiction. Failure to follow the instructions could
result in serious injury or property damage. The qualified service
personnel performing this work assumes responsibility for the
conversion.
• This appliance needs to be installed directly to the main (without
a plug). To do so, follow instructions in the "Three-Wire
Connection" section . If you wish to install this appliance directly to
the main (without a plug), it must be installed by a qualified service
personnel.
• DO NOT operate this appliance using a 2-prong adapter or an
extension cord. If a 2-prong wall receptacle is the only available
outlet, it is the personal responsibility of the consumer to have it
replaced with a properly grounded 3-prong or 4-prong wall
receptacle installed by a qualified service personnel. Severe shock
or damage to the range may occur if the range is not installed by a
qualified service personnel.
• This appliance features a pilotless electric ignition for energy
savings and reliability. It operates on a 208-240V/50-60Hz 12-15
Amp power supply.
• A separate circuit, protected by a 15 amp time delay fuse or
circuit breaker, is required.
• For personal safety, the appliance must be properly grounded.
ELECTRICAL INSTALLATION
WARNING:
It is the responsibility and obligation of the consumer to contact a
qualified service personnel to ensure the electrical installation is
adequate and conformance with all local codes and ordinances.
13

Publicité

loading