Publicité
Les langues disponibles
Les langues disponibles
LOCATION REQUIREMENTS
In order to ensure that the built-in appliance functions properly, the
cabinet containing it must be appropriate. The figures below and
the next page give the dimensions of the cut-out for installation in
a wall cabinet unit or under the counter. (Refer to Figure 2 and 3.)
21.1" (537 mm)
1.0"
23.4"
(24 mm)
(594mm)
0.4"
(10 mm)
23.4" (594 mm)
21.6"
(548mm)
0.9" (23 mm)
22.0"
(558 mm)
Installation in a
Wall Cabinet Unit
10
Figure 2
22.3"
(567.5 mm)
22.5"
22.5" - 23.0"
(570 mm)
23.8"
(575 mm
(604mm)
- 585 mm)
22.5"
(570 mm)
22.0"
(558 mm)
21.1" (537 mm)
1.0"
23.4"
(24 mm)
(594mm)
0.4"
(10 mm)
23.4" (594 mm)
21.6"
(548mm)
0.9" (23 mm)
IMPORTANT:
Installation must be in compliance with the consumption
declaration. In order to ensure adequate ventilation, the back
panel of the cabinet unit must be removed. When installing the
oven, it is better to have it rest on two wooden strips. If the oven
rests on a continuous, flat surface, there must be an aperture of at
least 1 ¾" x 22" (45 x 560mm). (Refer to Figure 4.)
Figure 3
22.5" - 23.0"
(575 mm
23.8"
- 585 mm)
(604mm)
22.3"
(567.5 mm)
Installation Under
the Counter
11
Publicité
