Assembly
GB
Instructions
1 . Remove the Easy Dome X
2 . Allow the ribs to drop outwards,
from its carryall and position so
causing the central boss to rise up
that the central boss is visible
towards you. Ensure that no material
lying down between the ribs.
has been trapped under the joints on
the central boss.
All manuals and user guides at all-guides.com
4 . To close each joint simply push
inwards until it locks shut.
IMPORTANT: the joints will snap
together with minimal pressure. If
undue resistance is felt then
3 . Lift the dome into
STOP and check none of the ribs
position and snap
are twisted. Work your way around
each joint together.
the dome until all four main ribs
are assembled.
5 . Assemble the porch rib by lifting and
snapping the joint together. Close the
middle joint first, followed by the two
outer joints. Attach the elastic loop over
the central rib and insert onto spigot as
shown.
GB