Publicité
Les langues disponibles
Les langues disponibles
28
HOW TO USE
Cycle Settings And Options
Sensor dry cycles have preset settings that are selected
automatically. Manual dry cycles have default settings, but
you may also customize the settings using the cycle setting
buttons. Press the button for that option to view and select
other settings.
NOTE
To protect your garments, not every dryness level,
temperature, or option is available with every cycle.
See the
for details.
Dry Level
Selects the level of dryness for the cycle. Press the Dry Level
button repeatedly to scroll through available settings.
More Dry or Very Dry will increase the cycle time, while Less
Dry or Damp Dry will decrease the cycle time.
iron.
Temp. Control
Adjusts the temperature setting from Ultra Low to High.
This allows precise care of your fabrics and garments. Press the
Temp. Control button repeatedly to scroll through available
settings.
Time Dry
remove wrinkles. Use the More Time/Less Time buttons to add
Your dryer features several additional cycle options to
customize cycles to meet your individual needs. Certain option
buttons also feature a special function (see the following page
for details) that can be activated by pressing and holding that
option button for 3 seconds.
To Add Cycle Options to a Cycle:
the desired cycle.
cycle.
3. Press the cycle option button(s) for the option you would like
to add. A confirmation message will be shown in the display.
start automatically.
Wrinkle Care
Selecting this option will tumble the load periodically for up
to 3 hours after the selected cycle, or until the door is opened.
This is helpful in preventing wrinkles when you are unable to
remove items from the dryer immediately.
Signal
To turn the Signal off, press the Signal On/Off button. Press
again to turn the Signal back on.
Damp Dry Signal
With this option, the dryer will signal when the load is
drying lightweight items or items that you would like to iron
or hang while still slightly damp.
All manuals and user guides at all-guides.com
Rack Dry
Use Rack Dry with items, such as wool sweaters, silk, and
lingerie, that should dry flat. Rack Dry can also be used with
items that should not be tumbled dry, such as gym shoes or
stuffed animals.
NEVER use the rack with a tumble dry cycle.
To install the drying rack:
Dry cycle.
Special functions
The option buttons also activate special functions, including
Child Lock.
Press and hold the option button marked with the special
function
* Child Lock
Use this option to prevent unwanted use of the dryer or to
keep cycle settings from being changed while the dryer is
operating. Press and hold the Easy Iron button for 3 seconds to
activate or deactivate the Child Lock function.
The Child Lock icon will be shown in the display, and all
controls are disabled except the Power button.
Once set, Child Lock remains active until it is manually
deactivated. Child Lock must be turned off to run
another cycle. To deactivate Child Lock, press and
hold the EASY IRON button for three seconds.
NOTE
rim and resting flat on the inside of the dryer.
NOTE
NOTE
Publicité
