Initial Operation; Default Setting - Selve i-Timer Plus Notice D'utilisation

GB
Initial operation/Default setting

Initial operation

Press any button once to 'wake up' the timer. Now you can select the
language with the +/- buttons and accept it with the OK button. The
clock is in automatic mode.

Default setting

TIME/DATE:
• current GMT and current date
PROGRAMME:
• ASTRO ➞ BLOCK ➞ BLOCKING TIME (1–5)
SETTING:
• HOLIDAY OFF
• light sensor SUN 05, sunlight value
(if light sensor is connected)
• END LIMIT, location
• SUMMER/WINTER ON
FUNCTION:
• ROLLER SHUTTER, DRIVE CONTROLLER, EXTERNAL SWITCH,
ALARM SIGNAL ON, EXPERT MODE OFF
Note: When the RESET button is pressed (with a ballpoint pen or
similar), the i-Timer Plus reverts to the default setting.
Exception: Menu levels of function, language and city.
▲ 06:30 h
▼ no default blocking time
BLOCKING TIME (6, 7)
▲ 08:00 h
▼ no default blocking time
50